From Loopers-Delight-request@loopers-delight.com Sun Dec 3 15:53:45 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 8D500FF577; Sun, 3 Dec 2017 15:53:45 +0000 (UTC) Old-Return-Path: X-Original-To: loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=199.224.80.229; helo=filter02.dlls.pa.frontiernet.net; envelope-from=jcshirke@frontier.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=frontier.com X-Greylist: delayed 489 seconds by postgrey-1.36 at arsenic; Sun, 03 Dec 2017 15:53:45 UTC X-Originating-IP: [172.78.21.93] X-Previous-IP: 172.78.21.93 From: Jeff Shirkey Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Subject: Anyone Want an RC-50? Date: Sun, 3 Dec 2017 09:50:20 -0600 Message-Id: To: loopers-Delight@loopers-delight.com Mime-Version: 1.0 (Apple Message framework v1085) X-Mailer: Apple Mail (2.1085) Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125523 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 3 Dec 2017 15:53:45 +0000 (UTC) Long story short, I'm broke. On the verge of losing everything, and have = been living this way for about a year and a half. With Christmas at = hand, things are even worse since I'm trying to get a little money = together for presents while trying to keep the lights on. So, that means = I'm selling gear. =20 I have an RC-50 that I haven't used in ages. I figure I may as well sell = it, even though I may regret it eventually. I think I have the original = box, although it's in the basement and is probably a bit musty. (I'll = certainly check, if that's important to you.) I know I have the manual = and power supply. I haven't checked Reverb (etc.) to see what they are going for. I'll = take any offer that sounds reasonable. Thanks, Jeff= From Loopers-Delight-request@loopers-delight.com Sun Dec 10 20:56:44 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 75A9DFF61D; Sun, 10 Dec 2017 20:56:44 +0000 (UTC) Old-Return-Path: X-Original-To: loopers-delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=40.92.2.90; helo=nam01-sn1-obe.outbound.protection.outlook.com; envelope-from=parispro00@hotmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=hotmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=hotmail.com; s=selector1; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version; bh=ktX1bwug6OkZPcuyE24tqThr24qy3LfzLLq2+lPDu5g=; b=iqS1acoebbABNTOPts0WvdyOd6A+6+vPOOJKUeQcEMFpXkeObj8IgwD1zGBH120nPJ6c8w/P3n+iqGQBCyOnXNzjdmfiiFKucZBKLH3xLHENZK62fI7+z/w8IuZ3o789ObLIbDa6hWlDijjL2p0+nJ9Eoq+kVaExIW+ewjgL0R9MLP+vB9ltPtNznzOrnlb9Jgxz5Nnk52ufj97qt4+eQuMDDDFyuH7Ey4hnfWt1CjLfppri5ZVb1xRiTiPBhEaNNmCyoDyfwacUzw4PLDh8zh0eQUst9W65iP2ZQ3nyxAkBl7F6JCU7zqMzOQnesWMpPLa+5GNV+ZMRbJwI1t3qow== From: Jeff Johans To: "loopers-delight@loopers-delight.com" Subject: Mobius Thread-Topic: Mobius Thread-Index: AQHTcfjoTGQHJN8QtE2yFGf/VUG+Ew== Date: Sun, 10 Dec 2017 20:56:30 +0000 Message-ID: Accept-Language: en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-incomingtopheadermarker: OriginalChecksum:F604A9F9EB6907073875703E16EEBDBC58D509FF5C14B3536330E458E5462E35;UpperCasedChecksum:8B767BC1BFDE13B9C9E6929C9CD73136CB07CA27A7420192EAA02098B9AB8089;SizeAsReceived:6928;Count:44 x-ms-exchange-messagesentrepresentingtype: 1 x-tmn: [7hbsN8m25ke32ZaOx4XBphcoot9pIb0ry5mu6qXvi+mTMTVCbM4ZSmKIgkV83jpY] x-ms-publictraffictype: Email x-microsoft-exchange-diagnostics: 1;BN3NAM01HT079;6:TRb8zkbd7JvRYWSNtM34mEuQrh4uezd/COyPH7rnAu1N1GkelMnX09otQEOOvaVmNZ9NemS3zaCEvNv/QgyUQNxQxKCHGf4WlFPWhuuMb+QESE3k06dDJnsHhO2U0fd20ioh/k8/HsQjl5cY/xV4vqDJQXqGQWoZTzNY3RnIHjDxN8fmYW6uB6yl/wVue8o8aBH20E9UJf0OYoXJtK+uqzyfkyCRpJQrGuqC0giZGS+eUYrFrsVYaUofKh9FsX/UJymKqnq2nqoVxFzDCRIehofxkZ+xAA6Nz/2U0RJ+twB5L3Kj/rVEGSzSJbUkqCTtf70a85T8Hmn0cPWZzxV4JbgJTScchx80zD52HymAeyw=;5:lUML/WzGB3TB9HJwKv19bLz2DkwA9Snm4FA51x+E5hs0T6EfWcBGRYaMOz3NgkWc9bwrEgzJ7uDsy0ZOAlwbE4P3UAeJjAR1ByceEVy0Gh2rpbKS1qzX6X8sg+5qdA1OjOfiexnIn/uZ3h/GPCkxbdbkKDLkYASiUvbiYlCVCa8=;24:dTLQkWyH0QLA8u4XLYS4+ANw4A1ckhjty8ph9A+bpv8oiqc9SY2HJtKjs/tk66E3+VRM0lpXWADqKNVba9W7LEYICbDxlfNm7oEfi5N5E94=;7:gjlejnC6ZnwinMc994XJftbdv4zXxSsjddKGWrK2XwvFN9LNpijxPotRCg4AkhJMz397KwxewsL/Js4XEFHH8QTnCQuioRrXIITWyj3floiV/MPcDUTFpTocVHMg98sAp7B80RKK2X0akqCjYICy29em/bv/Qzv1MiDQoNV6zw6epV+GBq9mTVQ5ZA4aiQFEwf6kV+M+Ih0MuEhPJqj3iP3R7ulU26tbnHa7Qd/xj3CWGz3GgO4K1V4+WWQ3XdNL x-incomingheadercount: 44 x-eopattributedmessage: 0 x-microsoft-antispam: UriScan:;BCL:0;PCL:0;RULEID:(201702061074)(5061506573)(5061507331)(1603103135)(2017031320274)(2017031324274)(2017031323274)(2017031322404)(1601125374)(1603101448)(1701031045);SRVR:BN3NAM01HT079; x-ms-traffictypediagnostic: BN3NAM01HT079: x-ms-office365-filtering-correlation-id: f4d24743-454b-4668-186d-08d540108455 x-exchange-antispam-report-cfa-test: BCL:0;PCL:0;RULEID:(444000031);SRVR:BN3NAM01HT079;BCL:0;PCL:0;RULEID:(100000803101)(100110400095);SRVR:BN3NAM01HT079; x-forefront-prvs: 05177D47DC x-forefront-antispam-report: SFV:NSPM;SFS:(7070007)(98901004);DIR:OUT;SFP:1901;SCL:1;SRVR:BN3NAM01HT079;H:DM5PR12MB1161.namprd12.prod.outlook.com;FPR:;SPF:None;LANG:; spamdiagnosticoutput: 1:99 spamdiagnosticmetadata: NSPM Content-Type: multipart/alternative; boundary="_000_DM5PR12MB116169C87E550040C03A9875DB360DM5PR12MB1161namp_" MIME-Version: 1.0 X-OriginatorOrg: hotmail.com X-MS-Exchange-CrossTenant-Network-Message-Id: f4d24743-454b-4668-186d-08d540108455 X-MS-Exchange-CrossTenant-originalarrivaltime: 10 Dec 2017 20:56:30.1301 (UTC) X-MS-Exchange-CrossTenant-fromentityheader: Internet X-MS-Exchange-CrossTenant-id: 84df9e7f-e9f6-40af-b435-aaaaaaaaaaaa X-MS-Exchange-Transport-CrossTenantHeadersStamped: BN3NAM01HT079 Resent-Message-ID: <26uP_.A.xeG.M-ZLaB@arsenic> Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125524 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 10 Dec 2017 20:56:44 +0000 (UTC) --_000_DM5PR12MB116169C87E550040C03A9875DB360DM5PR12MB1161namp_ Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Heya guys, was curious about 2 things. 1) Is there a way to search LD archives? It seems like I get a 404 error wh= en using the link on the website. 2) Has anyone heard much from Jeff Larson of Mobius? I know he made a post = or two around this time last year after the Ed Sheeran performance, but was= n't sure if he made any other contact. It also seems the Mobius forums have= been down for several months and wasn't sure if he had commented. Any info appreciated! Thanks, --_000_DM5PR12MB116169C87E550040C03A9875DB360DM5PR12MB1161namp_ Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable

Heya guys, was curious about 2 th= ings.


1) Is there a way to search LD ar= chives? It seems like I get a 404 error when using the link on the website.=


2) Has anyone heard much from Jef= f Larson of Mobius? I know he made a post or two around this time last year= after the Ed Sheeran performance, but wasn't sure if he made any other con= tact. It also seems the Mobius forums have been down for several months and wasn't sure if he had commented.


Any info appreciated!


Thanks,


--_000_DM5PR12MB116169C87E550040C03A9875DB360DM5PR12MB1161namp_-- From Loopers-Delight-request@loopers-delight.com Sun Dec 10 21:05:29 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 30B6AFF640; Sun, 10 Dec 2017 21:05:29 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: None (mailfrom) identity=mailfrom; client-ip=23.83.214.38; helo=common.maple.relay.mailchannels.net; envelope-from=david@trufun.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=trufun.com X-Greylist: delayed 375 seconds by postgrey-1.36 at arsenic; Sun, 10 Dec 2017 21:05:28 UTC X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-MC-Relay: Neutral X-MailChannels-SenderId: a2hosting|x-authuser|david@trufun.com X-MailChannels-Auth-Id: a2hosting X-Befitting-Illustrious: 7980b7683f376d37_1512939551389_3825912536 X-MC-Loop-Signature: 1512939551388:3641824775 X-MC-Ingress-Time: 1512939551388 Content-Type: text/plain; charset=us-ascii Mime-Version: 1.0 (Mac OS X Mail 10.3 \(3273\)) Subject: Gibson Echoplex pedals From: "david@trufun.com" In-Reply-To: Date: Sun, 10 Dec 2017 12:59:04 -0800 Cc: David Gans Content-Transfer-Encoding: quoted-printable Message-Id: <03D1C384-ACFE-442A-B622-157E7459FF3F@trufun.com> References: To: Loopers-Delight@loopers-delight.com X-Mailer: Apple Mail (2.3273) X-AuthUser: david@trufun.com Resent-Message-ID: <-f8ErC.A.KvG.ZGaLaB@arsenic> Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125525 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 10 Dec 2017 21:05:29 +0000 (UTC) I have a Gibson Echoplex pedal that needs to have some switches = replaced. Anybody know where I can get that done? From Loopers-Delight-request@loopers-delight.com Sun Dec 10 21:59:59 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 2BED2FF63E; Sun, 10 Dec 2017 21:59:59 +0000 (UTC) Old-Return-Path: X-Original-To: loopers-delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=68.114.190.28; helo=mtaout003-public.msg.strl.va.charter.net; envelope-from=tedkillian@charter.net; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=charter.net X-Authority-Analysis: v=2.2 cv=VrVTO6+n c=1 sm=1 tr=0 a=NGXRCNxRQKMHmn6amWLCjg==:117 a=NGXRCNxRQKMHmn6amWLCjg==:17 a=IkcTkHD0fZMA:10 a=x7bEGLp0ZPQA:10 a=JOA0iUbgAAAA:8 a=hOpmn2quAAAA:8 a=eYYImZmqAAAA:8 a=vv_OKtjezNSl8ew7d9YA:9 a=QEXdDO2ut3YA:10 a=tRksERym6KwA:10 a=DlRPJ1AfLFIA:10 a=UTGxUqkOWD8A:10 a=nG9pSErA777cby-CJFl-:22 a=GyA-uvUxXSCciAkwuKQO:22 a=Er1K3v-OwXOLDALMClTQ:22 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.3 \(3124\)) Subject: Re: Gibson Echoplex pedals From: tedkillian In-Reply-To: <03D1C384-ACFE-442A-B622-157E7459FF3F@trufun.com> Date: Sun, 10 Dec 2017 13:59:57 -0800 Cc: David Gans Content-Transfer-Encoding: quoted-printable Message-Id: References: <03D1C384-ACFE-442A-B622-157E7459FF3F@trufun.com> To: Loopers-Delight@loopers-delight.com X-Mailer: Apple Mail (2.3124) Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125526 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 10 Dec 2017 21:59:59 +0000 (UTC) David, The original switch is available via Mouser Electronics at: = They are very, very easy to install even if you only have modest = soldering skills. If you plan on keeping and using your EDP for any lenght of time, I = would by several (say a bag of 10 or 20). They are less than $1.50 USD each. These switches are plastic and wear out from time to time with even = moderate gigging use. But they are quieter than anything else. It is handy to have spares always on hand and be able to fix your own = gear. It really isn=E2=80=99t very hard. Best regards, Ted Killian 1811 Patrick Street Medford, OR 97504-4775 (Mobile) 541-890-6225 (email) tedkillian@charter.net > On Dec 10, 2017, at 12:59 PM, david@trufun.com wrote: >=20 >=20 > I have a Gibson Echoplex pedal that needs to have some switches = replaced. Anybody know where I can get that done? From Loopers-Delight-request@loopers-delight.com Sun Dec 10 22:01:15 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 4D268FF637; Sun, 10 Dec 2017 22:01:15 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2a00:1450:400c:c09::22a; helo=mail-wm0-x22a.google.com; envelope-from=mihalw@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=subject:to:references:from:message-id:date:user-agent:mime-version :in-reply-to:content-language; bh=2RvXcgyAtwyTn7c1PBVDBXz6hMbsVnXEq9UEYO9yxmI=; b=SbUG4aBdg3/jqmaV1TJ0FB75d12fQxeRxXoOI+EmTdvaQXSwLYtWiF9hGtUF+oMAZl RnWt+iyL/YklCuo/QcOYW8AF3qqoSmGVL0pTpDP0EvZ+7kKZhhSKNKpApUVj4hB4AFHD gXdUIphITlnN9wDyJC6QBTts5Sfx0MSGxpbacBrxp//6ZxzVFavOBGbvARK5vJ61ur3s Tgw90DxpRyKQZe6hEYTDpYWY5ABAUZHSVvW9wdOq5DjisWDyMaOh34+oh0/zNnJtIgfq kYwgjTszz2QJqKU1IQmrwi0kkNYHn3kRZIvOnep5oWMe6Ko4qFg9T/ATFaMFzSFs1Pw7 Sg9w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:subject:to:references:from:message-id:date :user-agent:mime-version:in-reply-to:content-language; bh=2RvXcgyAtwyTn7c1PBVDBXz6hMbsVnXEq9UEYO9yxmI=; b=DwPgbLTX99A8ohpV6ND5XtG8JFS9OIxy+uj/BVbJURkUv7ukKse/0b0Cu8JoG3LNTi 4UrKYe63KZ3LFq/ie69gu0p34MxJNKsbtxdYz/M4lNTuBZOBYtLuX8qy+5pD3d2uCJvl Llps9RYjA39GlHeP+N7oQa2+If/GfwD+bNixhztk4PM52tUaRJeVg1+8YfJsjGrWYpB+ Ek+BcxooLYm6P+zNV8Qf3bsO2zygT/q1eWSOSsq8XV+fMzlh+NjpqQffLONYvumNNwHG /WNG+TVWeifAYiZTAqSKQgqGdtlVP+bXlAjtCWtozV5PNhWyFTWAqkFyW0sEo6qhnvaY h2LA== X-Gm-Message-State: AKGB3mIG2G9e6F6XnP2AHge8LRTgvtSwf4BtJ0vV7Qto154pmsbul8Ww ZkLtsM/SzcolMJBZWRQAqUYcNA== X-Google-Smtp-Source: AGs4zMZOQ9ZhQocqoYXJRc1m8uuCaiXkG8GBvUNRzwA+I0/FkIuMAMryfvQN+VY6Dw3RcHTjV+743A== X-Received: by 10.28.157.7 with SMTP id g7mr8390707wme.89.1512943273546; Sun, 10 Dec 2017 14:01:13 -0800 (PST) Subject: Re: Mobius To: Loopers-Delight@loopers-delight.com References: From: =?UTF-8?Q?Micha=c5=82_Wiernowolski?= Message-ID: <5d22d499-bdb3-89d3-df30-8a2cb09720ed@gmail.com> Date: Sun, 10 Dec 2017 23:01:11 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.4.0 MIME-Version: 1.0 In-Reply-To: Content-Type: multipart/alternative; boundary="------------A0305464AF8E18DACE8FE7EA" Content-Language: en-US Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125527 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 10 Dec 2017 22:01:15 +0000 (UTC) This is a multi-part message in MIME format. --------------A0305464AF8E18DACE8FE7EA Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit Hi Jeff, Use 'site' query in google search, for example mobius site:www.loopers-delight.com Regards, Michał W dniu 10.12.2017 o 21:56, Jeff Johans pisze: > > Heya guys, was curious about 2 things. > > > 1) Is there a way to search LD archives? It seems like I get a 404 > error when using the link on the website. > > > 2) Has anyone heard much from Jeff Larson of Mobius? I know he made a > post or two around this time last year after the Ed Sheeran > performance, but wasn't sure if he made any other contact. It also > seems the Mobius forums have been down for several months and wasn't > sure if he had commented. > > > Any info appreciated! > > > Thanks, > > --------------A0305464AF8E18DACE8FE7EA Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: 8bit
Hi Jeff,

Use 'site' query in google search, for example
mobius site:www.loopers-delight.com

Regards,
Michał


W dniu 10.12.2017 o 21:56, Jeff Johans pisze:

Heya guys, was curious about 2 things.


1) Is there a way to search LD archives? It seems like I get a 404 error when using the link on the website.


2) Has anyone heard much from Jeff Larson of Mobius? I know he made a post or two around this time last year after the Ed Sheeran performance, but wasn't sure if he made any other contact. It also seems the Mobius forums have been down for several months and wasn't sure if he had commented.


Any info appreciated!


Thanks,



--------------A0305464AF8E18DACE8FE7EA-- From Loopers-Delight-request@loopers-delight.com Sun Dec 10 22:24:57 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 6A975FF61D; Sun, 10 Dec 2017 22:24:57 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: None (mailfrom) identity=mailfrom; client-ip=23.83.222.30; helo=caracal.ash.relay.mailchannels.net; envelope-from=david@trufun.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=trufun.com X-Greylist: delayed 1004 seconds by postgrey-1.36 at arsenic; Sun, 10 Dec 2017 22:24:56 UTC X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-MC-Relay: Neutral X-MailChannels-SenderId: a2hosting|x-authuser|david@trufun.com X-MailChannels-Auth-Id: a2hosting X-Trouble-Chemical: 77b55a6651b8f9cb_1512943687848_4128207398 X-MC-Loop-Signature: 1512943687847:2674562694 X-MC-Ingress-Time: 1512943687847 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 10.3 \(3273\)) Subject: Re: Gibson Echoplex pedals From: "david@trufun.com" In-Reply-To: Date: Sun, 10 Dec 2017 14:08:00 -0800 Cc: David Gans Content-Transfer-Encoding: quoted-printable Message-Id: References: <03D1C384-ACFE-442A-B622-157E7459FF3F@trufun.com> To: Loopers Delight X-Mailer: Apple Mail (2.3273) X-AuthUser: david@trufun.com Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125528 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 10 Dec 2017 22:24:57 +0000 (UTC) Thanks. I have VERY modest soldering skills but I expect I can manage = it. Thanks for the direct link to the switches! > On Dec 10, 2017, at 1:59 PM, tedkillian = wrote: >=20 > David, >=20 > The original switch is available via Mouser Electronics at: = >=20 > They are very, very easy to install even if you only have modest = soldering skills. >=20 > If you plan on keeping and using your EDP for any lenght of time, I = would by several (say a bag of 10 or 20). >=20 > They are less than $1.50 USD each. >=20 > These switches are plastic and wear out from time to time with even = moderate gigging use. >=20 > But they are quieter than anything else. >=20 > It is handy to have spares always on hand and be able to fix your own = gear. >=20 > It really isn=E2=80=99t very hard. >=20 > Best regards, >=20 > Ted Killian >=20 > 1811 Patrick Street > Medford, OR 97504-4775 > (Mobile) 541-890-6225 > (email) tedkillian@charter.net >=20 >> On Dec 10, 2017, at 12:59 PM, david@trufun.com wrote: >>=20 >>=20 >> I have a Gibson Echoplex pedal that needs to have some switches = replaced. Anybody know where I can get that done? >=20 From Loopers-Delight-request@loopers-delight.com Sun Dec 10 23:38:09 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 18B7CFF640; Sun, 10 Dec 2017 23:38:09 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: None (mailfrom) identity=mailfrom; client-ip=23.83.208.22; helo=bonobo.apple.relay.mailchannels.net; envelope-from=david@trufun.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=trufun.com X-Greylist: delayed 600 seconds by postgrey-1.36 at arsenic; Sun, 10 Dec 2017 23:38:08 UTC X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-MC-Relay: Good X-MailChannels-SenderId: a2hosting|x-authuser|david@trufun.com X-MailChannels-Auth-Id: a2hosting X-Shrill-Wipe: 5dbbd5843b807527_1512947905264_3196671621 X-MC-Loop-Signature: 1512947905264:479444491 X-MC-Ingress-Time: 1512947905264 From: "david@trufun.com" Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Mime-Version: 1.0 (Mac OS X Mail 10.3 \(3273\)) Subject: Echoplex pedals Message-Id: <5060FC5E-B8D3-4CFD-9195-FC3C56C02930@trufun.com> Date: Sun, 10 Dec 2017 15:18:18 -0800 Cc: David Gans To: Loopers Delight X-Mailer: Apple Mail (2.3273) X-AuthUser: david@trufun.com Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125529 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sun, 10 Dec 2017 23:38:09 +0000 (UTC) Would there be any need/point in replacing the resistors in my Echoplex = pedal board? From Loopers-Delight-request@loopers-delight.com Mon Dec 11 00:13:04 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 5B203FF613; Mon, 11 Dec 2017 00:13:04 +0000 (UTC) Old-Return-Path: X-Original-To: loopers-delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=68.114.190.29; helo=mtaout004-public.msg.strl.va.charter.net; envelope-from=tedkillian@charter.net; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=charter.net X-Authority-Analysis: v=2.2 cv=XZf59Mx5 c=1 sm=1 tr=0 a=NGXRCNxRQKMHmn6amWLCjg==:117 a=NGXRCNxRQKMHmn6amWLCjg==:17 a=IkcTkHD0fZMA:10 a=x7bEGLp0ZPQA:10 a=eYYImZmqAAAA:8 a=Qrq-wNT4mVx3NPqvbrEA:9 a=QEXdDO2ut3YA:10 a=Er1K3v-OwXOLDALMClTQ:22 Content-Type: text/plain; charset=utf-8 Mime-Version: 1.0 (Mac OS X Mail 9.3 \(3124\)) Subject: Re: Echoplex pedals From: tedkillian In-Reply-To: <5060FC5E-B8D3-4CFD-9195-FC3C56C02930@trufun.com> Date: Sun, 10 Dec 2017 16:13:02 -0800 Cc: David Gans Content-Transfer-Encoding: quoted-printable Message-Id: <31DE653D-EADC-4BF8-AB69-46BEB6F5C37E@charter.net> References: <5060FC5E-B8D3-4CFD-9195-FC3C56C02930@trufun.com> To: Loopers-Delight@loopers-delight.com X-Mailer: Apple Mail (2.3124) Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125530 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Mon, 11 Dec 2017 00:13:04 +0000 (UTC) David, Only if they are somehow damaged by your soldering job (something to = take care and watch out for). Otherwise, those resitors should last a lifetime. It=E2=80=99s only the mechanical switches that go bad. Ted > On Dec 10, 2017, at 3:18 PM, david@trufun.com wrote: >=20 > Would there be any need/point in replacing the resistors in my = Echoplex pedal board? From Loopers-Delight-request@loopers-delight.com Mon Dec 11 01:50:38 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 3AF76FF60A; Mon, 11 Dec 2017 01:50:38 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2a00:1450:4010:c07::22c; helo=mail-lf0-x22c.google.com; envelope-from=cnovey@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:reply-to:in-reply-to:references:from:date:message-id :subject:to; bh=UFf/KjhnvJAvnAfN9QpnazW/fQiL0pXoauZgXTxk7qw=; b=n7U2yAXmGeJeWLw51fLxT8vlSUUzwgo23lfNGMqjq4whB8TKRxcEh1l+8/5vtOwR99 y0lAlclXS9AGGclq/DmzCkv+OSg84DDsTPrjkXqFcuHe7LbdaRgqPcOrKVO/I0+IqmOX N4QsSqY6S6Aet2byMmjFQoPugH3bGm+/tdB+YhnkKBIAO7HVLQJcXDq834E4s9ak45bm 8diOZZodzO+yx7sn/MHnuiAL0Q4i3MEShILlPmeB1nl4xwkPma2M+yJfmnPBYjzgX/iR kvyuG3Q42/qTr8LgOLAMaAoUGdTGK3ZB0y3rfgRd1biDqgw0ZH50xvSOQv8Rbwbvg8Df Uh/A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:reply-to:in-reply-to:references :from:date:message-id:subject:to; bh=UFf/KjhnvJAvnAfN9QpnazW/fQiL0pXoauZgXTxk7qw=; b=MS7ijZLQ0J0p3ZkJBpgTuy8zXTQOLNaJ0U8kdfNk/aWtTnJfbRgiib/x3NjgFl/cSB JyaalCiGmF4MjD5y8whZOUaQeMnvWe3iSLftd6xeNtw8BiTAeo9Nu9OrnrUuq+fajblW s7GkpP+ogs4o5jMO+xJO+OW7uMcBpt4V58bKRHZYzuUQBLicAUHr5//0EzX4yPdyTm9j OATrbGBFFCF+YI3l4L5vDUX28XD+QAZqtob82YWHC7DLik9GMLBVXKSSyeAUnjrfYbHs qQpHE6yGQnn6Tbn50Vm+q4Si4/kL66P3tzQPpo2kpa170fCTolvpJA8BO0AS9TGdOzuG O5aA== X-Gm-Message-State: AJaThX5mS+me6S1HvRsy0DMaCxKFoI9YQQniT5k6E5epdQY8Nl2VhD8P q2D0LwDc7P4YPTIOpJY1D7Zps9ZRnl58K4PbOJg= X-Google-Smtp-Source: AGs4zMZC8zlrm0b4f7psX2nfJOAv3SejJ9CrUhFQC4RlHD9FUqAA+phlAZgtNYHr8IN9MfXzvRQEBGnY+TLq4gwQj94= X-Received: by 10.46.97.10 with SMTP id v10mr18648904ljb.48.1512957035762; Sun, 10 Dec 2017 17:50:35 -0800 (PST) MIME-Version: 1.0 Reply-To: cnovey@gmail.com In-Reply-To: <5060FC5E-B8D3-4CFD-9195-FC3C56C02930@trufun.com> References: <5060FC5E-B8D3-4CFD-9195-FC3C56C02930@trufun.com> From: Clifford Novey Date: Sun, 10 Dec 2017 17:50:33 -0800 Message-ID: Subject: Re: Echoplex pedals To: Loopers-Delight@loopers-delight.com Content-Type: multipart/alternative; boundary="f403045f7408ad5661056006c24a" Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125531 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Mon, 11 Dec 2017 01:50:38 +0000 (UTC) --f403045f7408ad5661056006c24a Content-Type: text/plain; charset="UTF-8" Nope. On Dec 10, 2017 3:38 PM, "david@trufun.com" wrote: > > > Would there be any need/point in replacing the resistors in my Echoplex > pedal board? > > > > > > --f403045f7408ad5661056006c24a Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable
Nope.=C2=A0

On Dec 10, 2017 3:38 PM, "david@trufun.com" <david@trufun.com> wrote:


Would there be any need/point in replacing the resistors in my Echoplex ped= al board?





--f403045f7408ad5661056006c24a-- From Loopers-Delight-request@loopers-delight.com Mon Dec 11 05:08:59 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 075C7FF637; Mon, 11 Dec 2017 05:08:59 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: None (mailfrom) identity=mailfrom; client-ip=23.83.222.30; helo=caracal.ash.relay.mailchannels.net; envelope-from=david@trufun.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=trufun.com X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-Sender-Id: a2hosting|x-authuser|david@trufun.com X-MC-Relay: Neutral X-MailChannels-SenderId: a2hosting|x-authuser|david@trufun.com X-MailChannels-Auth-Id: a2hosting X-Whimsical-Chief: 1d85a15f042001d2_1512968921747_3110633515 X-MC-Loop-Signature: 1512968921747:3956725169 X-MC-Ingress-Time: 1512968921746 From: "david@trufun.com" Message-Id: Content-Type: multipart/alternative; boundary="Apple-Mail=_BD230412-FB9F-443C-B47F-F29765CBED42" Mime-Version: 1.0 (Mac OS X Mail 10.3 \(3273\)) Subject: Re: Echoplex pedals Date: Sun, 10 Dec 2017 21:08:33 -0800 In-Reply-To: Cc: David Gans , Loopers Delight To: cnovey@gmail.com References: <5060FC5E-B8D3-4CFD-9195-FC3C56C02930@trufun.com> X-Mailer: Apple Mail (2.3273) X-AuthUser: david@trufun.com Resent-Message-ID: <75X9.A.13.qLhLaB@arsenic> Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125532 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Mon, 11 Dec 2017 05:08:59 +0000 (UTC) --Apple-Mail=_BD230412-FB9F-443C-B47F-F29765CBED42 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=us-ascii Thanks! Been YEARS since I picked up a soldering iron. > On Dec 10, 2017, at 5:50 PM, Clifford Novey wrote: >=20 > Nope.=20 >=20 > On Dec 10, 2017 3:38 PM, "david@trufun.com " = > wrote: >=20 >=20 > Would there be any need/point in replacing the resistors in my = Echoplex pedal board? >=20 >=20 >=20 >=20 >=20 --Apple-Mail=_BD230412-FB9F-443C-B47F-F29765CBED42 Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset=us-ascii


Thanks! Been YEARS since I picked up a soldering = iron.





On Dec 10, 2017, at 5:50 PM, = Clifford Novey <cnovey@gmail.com> wrote:

Nope. 

On Dec 10, 2017 3:38 PM, "david@trufun.com" <david@trufun.com> = wrote:


Would there be any need/point in replacing the resistors in my Echoplex = pedal board?






= --Apple-Mail=_BD230412-FB9F-443C-B47F-F29765CBED42-- From Loopers-Delight-request@loopers-delight.com Fri Dec 22 09:55:04 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id B923BFF648; Fri, 22 Dec 2017 09:55:04 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2607:f8b0:4002:c09::235; helo=mail-yb0-x235.google.com; envelope-from=stratovangelist@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:from:date:message-id:subject:to; bh=gPbwbApfagX5fcfI6DnoED5Q7BJwnrY+uR9+TRx2MzY=; b=fT3DqgjWSYPNGvvi3FTnUFdqLRc1wh7DBNY1G2nrVWuelgcMJ0DQu93z4sKUu3GuyG tH8K8/Qk4woec3SIN3hgR1yfM4DT/n02gqcGPw1y0Bm2QTQ05vr0kuj9T5aKa/fGGpla OqBwaSPpyMya6jVC7uUphM6bHd6vH4OdTWG7BKYNM9KDfJ+xcpAKxtkpRVitCamSWg8V eDgUJmDTHkIms8ufqR0vcWtqqYPyEyvrD8FQxjLHGJQrdz5fAndLA8EwBNZAS/5pl9MD Z5d3USeaoHsEyjJoBWQSXHa3ktgZ6i8AB36gxYbJdDS7kGAGmTfd0S5AaoNJOVBSEjU9 UsBg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:from:date:message-id:subject:to; bh=gPbwbApfagX5fcfI6DnoED5Q7BJwnrY+uR9+TRx2MzY=; b=ZhXUXX3jiEoyMPGQruLi6W+0Xbh9W14j4QqCTosIYMlg72EvYbopv2PsFJMQbbzH3m u//b9Yo3uK2wiMi1rcepmetHWPTZ3P4X7fA+fk21Nac6djmQDe4/B8hJA7ZZkJkjwDry NmwJQ7N3xs8NxhGF2wUioG/DGlP1TeBhPbMQE58HP92Ij0LphuAqcAgvMmQmMe9kCGrI P6kkF4S+rTmiqgsq4fyFZg2LDy6oMsN2JotBkODokgjXmS9sQTZFrJdndHaGoGXdMWu3 gbVkA3kpO6N0mg7YXfoDCTRp0YTnAnPVyUUa+4KNdJ1mvdtCDQa8wY7V9klUTFfSXZfl n4mg== X-Gm-Message-State: AKGB3mJu7NNnrnktrBa/Tgmi19j6m9qGdhLrBRh6sgnavIdOr+VFCzaN hWuISjsEtG6Q7717T6U4GEld0hjZi4THjb3M+u4= X-Google-Smtp-Source: ACJfBouzzBXR20+jOnS91/9nYOKqyqXVKhPdDa9ySFFVrTKbL3DV/Y437R12gEjM3+/vfLgLrZHT10cJsnpGxHRnCV4= X-Received: by 10.37.144.141 with SMTP id t13mr10242909ybl.249.1513936503532; Fri, 22 Dec 2017 01:55:03 -0800 (PST) MIME-Version: 1.0 From: DogFaced Boy Date: Fri, 22 Dec 2017 04:55:03 -0500 Message-ID: Subject: Contact info for Looperlative Maker? To: Loopers-Delight@loopers-delight.com Content-Type: multipart/alternative; boundary="089e08329c1c8171880560eacf79" Resent-Message-ID: <-S3ruD.A.BuB.4ZNPaB@arsenic> Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125533 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Fri, 22 Dec 2017 09:55:04 +0000 (UTC) --089e08329c1c8171880560eacf79 Content-Type: text/plain; charset="UTF-8" Hi again. I have tried everything I can imagine to send a message through the Looperlative Facebook page, but nothing will go through? I'm trying to find out about service or de-bugging my LP-1, the little screen has almost a randomized pattern of responses? It would be TOTALLY AWESOME if it's a download fix, but if it takes more, so be it. I can't TRUST it, which is sort-of crucial. Thanks. --089e08329c1c8171880560eacf79 Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable
Hi again. I have tried everything I can imagine to send a = message through the Looperlative Facebook page, but nothing will go through= ? I'm trying to find out about service or de-bugging my LP-1, the littl= e screen has almost a randomized pattern of responses? It would be TOTALLY = AWESOME if it's a download fix, but if it takes more, so be it. I can&#= 39;t TRUST it, which is sort-of crucial. Thanks.
--089e08329c1c8171880560eacf79-- From Loopers-Delight-request@loopers-delight.com Fri Dec 29 15:50:38 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 2FC9AFF65D; Fri, 29 Dec 2017 15:50:38 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2a00:1450:400c:c09::22d; helo=mail-wm0-x22d.google.com; envelope-from=jordi.cs92@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=message-id:mime-version:to:from:subject:date:importance; bh=JZFtaN1pka6KifF+lyVyGeS1O2MEaxjbNm6aC/KQTPw=; b=jwF5afcVZqo1AsHUgVaARdywDChDZzlvH3H5PkcglTx0YxpvPgY1rnoKxBorPMSrAn H+eujGa9IgDYFXn63B6ZevtEJI7Y9+myzd7CUsuBlNu7h4Y2JIE4rN4O3qWH93xbkiaF Keb349P+mIwWyRyeZzw8alB/pb5R6vCQLUYU1AIsKiEd5vXW2DUwUEpaHzHpfrolkIiw hlIGeEoIKPvhb9l3zefcm5xQyiJCy3GoC/vlaq4Ue/rWZZsL0Fe/hxKzyGvGPUp7/jRO FiY+eEmeomjbJpAHVC8l67IggrIcaKTQrUesTslnxStvS5oyUbl/hLGv9VvmC0SV8zme 7K6w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:message-id:mime-version:to:from:subject:date :importance; bh=JZFtaN1pka6KifF+lyVyGeS1O2MEaxjbNm6aC/KQTPw=; b=Dr3jz4y+q0TeYyTomFGaaVW8v0+13eQmb0QRuFfDKv6/H4TsSfNPWC4tmhJoKFKZ58 3ZQs6EyThoDg+We9g4QpNPPBuI29QlbnL11mGTpOnGPY3LrCwLVwimdP2NS2eh8CMkuU /kb91yJb3nyiaUs8Mc7mUKmHD6tTjO1j9C3X96qkvOnAbtsVqJ2NH1DZuquMur9lTubM +Pwyt7dEU3MCf+UEjB3aZQn0SFuZbgz/wwKWKa1hlFZvM0AwHLNnavmCzFsSRlw/2Wd3 fhPFPStAVo3JQzSB7CZjQ6+pZvIX7iFy5TdVJ3b4Sf7g0yY8yE0+MWNOO20vIKvrldx0 lZsQ== X-Gm-Message-State: AKGB3mLNWjpTJcFF8qm/3QZQFJGTNjBftclDk40wNTLAUDYsJI8eMJjk EkAFUwmzl6Lo04rKEe4OJNpnmsDj X-Google-Smtp-Source: ACJfBotXTimDBq8+ew2ZXmkauZveWGPwlF38vqPbwTHwLOS+CXW2ghyEK6H5O8+NVCVEBG6/Lo+O7Q== X-Received: by 10.80.244.141 with SMTP id s13mr45452993edm.222.1514562636362; Fri, 29 Dec 2017 07:50:36 -0800 (PST) Message-ID: <5a46644b.5b92500a.a8da8.a517@mx.google.com> MIME-Version: 1.0 To: "Loopers-Delight@loopers-delight.com " From: =?utf-8?Q?Jordi_Cervell=C3=B3?= Subject: Question about Mobius OSC Watchers Date: Fri, 29 Dec 2017 16:50:33 +0100 Importance: normal X-Priority: 3 Content-Type: multipart/alternative; boundary="_65EE3412-BE4D-4A5F-9621-9E0B378D64DA_" Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125534 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Fri, 29 Dec 2017 15:50:38 +0000 (UTC) --_65EE3412-BE4D-4A5F-9621-9E0B378D64DA_ Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" I=E2=80=99m starting to use OSC Watchers to keep track of things on Mobius = with an external osc device but I have some problems with this feature. >From the 2.0 documentation of Mobius: loopLocation=C2=A0- the current playback location in the loop loopStart=C2=A0- flashes at the loop start point loopSubcycle=C2=A0- flashes at the loop start point loopCycle=C2=A0- flashes at the loop start point modeRecord=C2=A0- set when the loop is in record mode I=E2=80=99ve tried all of them and loopStart, loopSubcycle and loopCycle ac= t exactly like the beaters of the Mobius Interface but modeRecord and loopL= ocation doesn=E2=80=99t work for me.=20 LoopLocation is the main reason why I=E2=80=99m using osc watchers. I want = to use Mobius without a laptop or pc monitor in front of me. I want to use = it with an iPad osc controller, and seeing the location of each loop in a c= ontinuous way to see where I am in each loop is crucial for my performance= . I=E2=80=99m using this line just after opening but it doesn=E2= =80=99t work: Is there any solution for this? I=E2=80=99ve tried everything and searched = everywhere (Mobius circular labs forum is down now, so I can=E2=80=99t ask = anything there...) but I didn=E2=80=99t found a solution. Thank you. --_65EE3412-BE4D-4A5F-9621-9E0B378D64DA_ Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="utf-8"

I=E2=80=99m starting to use OSC Watc= hers to keep track of things on Mobius with an external osc device but I ha= ve some problems with this feature.

 

From the 2.0 documentation of Mobius:

loopLocation - the current playback location in the= loop

loopStart - flashes at the lo= op start point

loopSubcycle - flash= es at the loop start point

loopCycle&nbs= p;- flashes at the loop start point

mode= Record - set when the loop is in record mode

 

I=E2=80= =99ve tried all of them and loopStart, loopSubcycle and loopCycle act exact= ly like the beaters of the Mobius Interface but modeRecord and loopLocation= doesn=E2=80=99t work for me.

 

LoopLocation is the main reason why I=E2=80=99m using= osc watchers. I want to use Mobius without a laptop or pc monitor in front= of me. I want to use it with an iPad osc controller, and seeing the locati= on of each loop in a continuous way =C2=A0to see where I am in each loop is= crucial for my performance.

 

<= p class=3DMsoNormal>I=E2=80=99m using this line just after opening <OscC= onfig> but it doesn=E2=80=99t work:

<Osc= Watcher name=3D'loopLocation' path=3D'/1/fader1'/>

 

Is there any solution for this= ? I=E2=80=99ve tried everything and searched everywhere (Mobius circular la= bs forum is down now, so I can=E2=80=99t ask anything there...) but I didn= =E2=80=99t found a solution.

 

<= p class=3DMsoNormal>Thank you.

 

 

 =

 

 

 

= --_65EE3412-BE4D-4A5F-9621-9E0B378D64DA_-- From Loopers-Delight-request@loopers-delight.com Fri Dec 29 22:11:02 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 6A819FF659; Fri, 29 Dec 2017 22:11:02 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2a00:1450:400c:c09::233; helo=mail-wm0-x233.google.com; envelope-from=zangeric@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to; bh=ug0YOJUSm+sDoKYr+6TQnTyP9Nd5BQG6lyfpK9KCQqA=; b=EJedEbSyFUFD+ZW0J+YeT2tvF2ALAbHFsob4m0HF/mN1VIstXp6MyefQ9tCVxa4MuV lETjfQCjIoc46ssWMaDmmgxvDf9p7uBAbXxJ3leoDzKWY6AxsgYRhkGQBoCnVukHtTtd KnNQVSojQm7D2bGOx6grSqmiI3FMBtdw3OqHSy7G6FfFVDLce85HiEC3G6+F9I3GD6Ci b2GE6M2z1eWDmwiYX2u6/0QPykPyoY5ighnzl+YOvHOgtScv8UTwHrcsFju8LhO3lNxg jIkVXVsTQN/TfLuFR2Gw9q9uYX2rtGq6Iy2a67aebMT3A8MbA2/hplt1P9835tpeje3/ Wg3Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to; bh=ug0YOJUSm+sDoKYr+6TQnTyP9Nd5BQG6lyfpK9KCQqA=; b=TeHoNU0fJxChrR2YEytJ8n0VfXJ0QeZCIwyNl18qxctcgwzDPYm8Y1CvnfStprUPEF i69Rwv0A5yU+IDY2I7id8Z2wQx4Yxap+WAjb8xJrgXwewiJuXPSJrAu8iNrsU7APO+vM oaS7a3TZLH2CaXri1mLvyWy3Au8hYzdis0EmhUua2uMzEFxDt6f+J7bU2+uYBNVLbRUZ cyALDYKQ7kWAF49dHcUI3XmvgjhHrmc9U3BAYev7LRsuyFZLWuD3AniengzOgsRP4rim goFeg7/7b/R/KwJmCYZdQwIzGnroIR8mWA1+jMJHS9lWuAroZQwLvHWy0Hjp83TE8AIQ 7M4Q== X-Gm-Message-State: AKGB3mIP2smEjfohhR4+7BxJgA0+sMI1u8kmVEPlnI9sg5cyyoGq7uHB LyvIhmNAV+foz34/1OGsGoUuwgGemyOMIsl8AYE= X-Google-Smtp-Source: ACJfBosFQ+QsG4UW0FY05/O2nbfo+ZjtYkrHzl7ynRMtpuN+s9DsTv87ZfruPG3DX5LQl5OPS/UYyCnx7/kJONGpqZE= X-Received: by 10.80.135.199 with SMTP id 7mr45752090edz.103.1514585460624; Fri, 29 Dec 2017 14:11:00 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <5a46644b.5b92500a.a8da8.a517@mx.google.com> References: <5a46644b.5b92500a.a8da8.a517@mx.google.com> From: Eric Zang Date: Fri, 29 Dec 2017 15:11:00 -0700 Message-ID: Subject: Re: Question about Mobius OSC Watchers To: Loopers-Delight@loopers-delight.com Content-Type: multipart/alternative; boundary="f403045c0adc5ccfa7056181e82d" Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125535 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Fri, 29 Dec 2017 22:11:02 +0000 (UTC) --f403045c0adc5ccfa7056181e82d Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Sorry I have no answer, but it sounds interesting, google didn't find "OSC Watchers". What is/where is this program? On Fri, Dec 29, 2017 at 8:50 AM, Jordi Cervell=C3=B3 wrote: > I=E2=80=99m starting to use OSC Watchers to keep track of things on Mobiu= s with an > external osc device but I have some problems with this feature. > > > > From the 2.0 documentation of Mobius: > > loopLocation - the current playback location in the loop > > loopStart - flashes at the loop start point > > loopSubcycle - flashes at the loop start point > > loopCycle - flashes at the loop start point > > modeRecord - set when the loop is in record mode > > > > I=E2=80=99ve tried all of them and loopStart, loopSubcycle and loopCycle = act > exactly like the beaters of the Mobius Interface but modeRecord and > loopLocation doesn=E2=80=99t work for me. > > > > LoopLocation is the main reason why I=E2=80=99m using osc watchers. I wan= t to use > Mobius without a laptop or pc monitor in front of me. I want to use it wi= th > an iPad osc controller, and seeing the location of each loop in a > continuous way to see where I am in each loop is crucial for my > performance. > > > > I=E2=80=99m using this line just after opening but it doesn= =E2=80=99t work: > > > > > > Is there any solution for this? I=E2=80=99ve tried everything and searche= d > everywhere (Mobius circular labs forum is down now, so I can=E2=80=99t as= k anything > there...) but I didn=E2=80=99t found a solution. > > > > Thank you. > > > > > > > > > > > > > --=20 www.ericzang.com --f403045c0adc5ccfa7056181e82d Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable
Sorry I have no answer, but it sounds interesting, google = didn't find "OSC Watchers". What is/where is this program?

On Fri, De= c 29, 2017 at 8:50 AM, Jordi Cervell=C3=B3 <jordi.cs92@gmail.com>= ; wrote:

I=E2=80=99m starting to use OSC Watchers to keep = track of things on Mobius with an external osc device but I have some probl= ems with this feature.

=C2=A0

From the 2.0 documentation of Mobius:

loopLocation=C2=A0- the current playback location in the loo= p

loopStart=C2=A0- flashes at the l= oop start point

loopSubcycle=C2=A0-= flashes at the loop start point

lo= opCycle=C2=A0- flashes at the loop start point

modeRecord=C2=A0- set when the loop is in record mode=

=C2=A0=

I=E2=80=99ve tried all of them and loopStart, lo= opSubcycle and loopCycle act exactly like the beaters of the Mobius Interfa= ce but modeRecord and loopLocation doesn=E2=80=99t work for me.

=C2=A0

LoopLocation= is the main reason why I=E2=80=99m using osc watchers. I want to use Mobiu= s without a laptop or pc monitor in front of me. I want to use it with an i= Pad osc controller, and seeing the location of each loop in a continuous wa= y =C2=A0to see where I am in each loop is crucial for my performance.

=C2=A0

I=E2=80= =99m using this line just after opening <OscConfig> but it doesn=E2= =80=99t work:

<OscWatcher name=3D'loo= pLocation' path=3D'/1/fader1'/>

=C2=A0

Is there any solution for this= ? I=E2=80=99ve tried everything and searched everywhere (Mobius circular la= bs forum is down now, so I can=E2=80=99t ask anything there...) but I didn= =E2=80=99t found a solution.

=C2=A0=

Thank you.

=C2= =A0

=C2=A0

=C2=A0

=C2=A0

=C2=A0

=C2=A0




--
--f403045c0adc5ccfa7056181e82d-- From Loopers-Delight-request@loopers-delight.com Fri Dec 29 22:21:23 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id D3E0CFF656; Fri, 29 Dec 2017 22:21:23 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2a00:1450:400c:c09::236; helo=mail-wm0-x236.google.com; envelope-from=jordi.cs92@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=message-id:mime-version:to:from:subject:date:importance:in-reply-to :references; bh=5a6YXdMTozjvYWJz1I4TC+e7i+pc0rvQNGwP/7iV7YI=; b=OLQL8vtZS8qJQp+W6O5JDQ4kMjAD08r98T9LYdc+1XzRWl7IqRa36juogLdjNAns1z gSUWl2gzsjcC67B9lYx0YI8hBVZW03zStXP2kCiYdqyC/N0xkCKKE7p5MMKKG/8Wnx17 BtH0gjgg1OQtZBp8jb2JY3CiLFeP2peBm1vv1grOPvv6zBS/AP0QzXiWEbJg4OSakfF1 mcVUSrZsQj7I1PJ3UO7nFYR882cnEz3ieuRr7fRFaphJFCWZD8ZTHvElol0TcWl413mg YF553GSbQ9bpCBV0ru2zkwO5Ljm8/EQ/wUBKfA9hOClIgDSXsO+4NoDFfN6j6Xkm9eLm q6ww== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:message-id:mime-version:to:from:subject:date :importance:in-reply-to:references; bh=5a6YXdMTozjvYWJz1I4TC+e7i+pc0rvQNGwP/7iV7YI=; b=lopbjSM5CLA5Zf/TGJp7LpHL3/A5h+mrEI6y1TyzXTfMO87yChf9rutinL5JeFJBjg T08P67CAbBaGH4ms7Lp7VoTLiIyp0kuvUUAqjStKuz4H+IVYaf5lj8hEypcQHhptdWvY rmOPxYHixj4HQsrpoJJCeXRT7WnXHARCp8ExesGq2D1ANoeGFMSG9eAaFdnMhUFgfECN vDeLYp/XQaFunLr+WkcnQ/NckgqTiOe/XF84DCUpZ7MNvtXjuqMXQOHxp24Hl3vtdPcd JQGLD82hKPfk3PWrXD8eUU2+6PX66jCK6KND9j1OE9f2HxsaTvt4IMlCjNX9iWgh46ws u2Eg== X-Gm-Message-State: AKGB3mIRrQVveflEqYkDJR7e471dB4cJTX0Zsjm+Y1aylhKedTl/SXCC wtG1fQua/a+qG/cI9Z6RYzzEDGZ/ X-Google-Smtp-Source: ACJfBou3XXRXcT4aNtyOXTEAMPw1LDozIgscKXoFWmzvXGa3Ofj12kBjMglOIozNG+IEVuElzNBA+A== X-Received: by 10.28.138.142 with SMTP id m136mr32137058wmd.40.1514586081510; Fri, 29 Dec 2017 14:21:21 -0800 (PST) Message-ID: <5a46bfe0.eb8ddf0a.a5e6.1d17@mx.google.com> MIME-Version: 1.0 To: "Loopers-Delight@loopers-delight.com" From: =?utf-8?Q?Jordi_Cervell=C3=B3?= Subject: RE: Question about Mobius OSC Watchers Date: Fri, 29 Dec 2017 23:21:19 +0100 Importance: normal X-Priority: 3 In-Reply-To: References: <5a46644b.5b92500a.a8da8.a517@mx.google.com> Content-Type: multipart/alternative; boundary="_B6CA3E1F-3704-4AE8-AA77-9142414FF2EC_" Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125536 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Fri, 29 Dec 2017 22:21:23 +0000 (UTC) --_B6CA3E1F-3704-4AE8-AA77-9142414FF2EC_ Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="utf-8" The looper program is called Mobius and OSC Watchers are a feature to be ab= le to send OSC messages from Mobius to export certain status of the program= . For example the loop playback position or when a loop starts again etc=E2= =80=A6 You can check it out in the documentation: http://www.circularlabs.com/doc/v2/osc.htm#Status Export From: Eric Zang Sent: Friday, 29 December 2017 11:11 PM To: Loopers-Delight@loopers-delight.com Subject: Re: Question about Mobius OSC Watchers Sorry I have no answer, but it sounds interesting, google didn't find "OSC = Watchers". What is/where is this program? On Fri, Dec 29, 2017 at 8:50 AM, Jordi Cervell=C3=B3 = wrote: I=E2=80=99m starting to use OSC Watchers to keep track of things on Mobius = with an external osc device but I have some problems with this feature. =C2=A0 >From the 2.0 documentation of Mobius: loopLocation=C2=A0- the current playback location in the loop loopStart=C2=A0- flashes at the loop start point loopSubcycle=C2=A0- flashes at the loop start point loopCycle=C2=A0- flashes at the loop start point modeRecord=C2=A0- set when the loop is in record mode =C2=A0 I=E2=80=99ve tried all of them and loopStart, loopSubcycle and loopCycle ac= t exactly like the beaters of the Mobius Interface but modeRecord and loopL= ocation doesn=E2=80=99t work for me.=20 =C2=A0 LoopLocation is the main reason why I=E2=80=99m using osc watchers. I want = to use Mobius without a laptop or pc monitor in front of me. I want to use = it with an iPad osc controller, and seeing the location of each loop in a c= ontinuous way =C2=A0to see where I am in each loop is crucial for my perfor= mance. =C2=A0 I=E2=80=99m using this line just after opening but it doesn=E2= =80=99t work: =C2=A0 Is there any solution for this? I=E2=80=99ve tried everything and searched = everywhere (Mobius circular labs forum is down now, so I can=E2=80=99t ask = anything there...) but I didn=E2=80=99t found a solution. =C2=A0 Thank you. =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 --=20 www.ericzang.com --_B6CA3E1F-3704-4AE8-AA77-9142414FF2EC_ Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="utf-8"

The looper progra= m is called Mobius and OSC Watchers are a feature to be able to send OSC me= ssages from Mobius to export certain status of the program. For example the= loop playback position or when a loop starts again etc=E2=80=A6=

 =

You can check it out in the doc= umentation:

http://www.circularlabs.com/doc/= v2/osc.htm#Status Export

 

From: Eric Zang
Sent: Friday, 29 December 2017 11:11 PM
To:
Loopers-Delight@loopers-del= ight.com
Subject: Re: Question about Mobius OSC Watchers

<= /div>

 

So= rry I have no answer, but it sounds interesting, google didn't find "O= SC Watchers". What is/where is this program?

 

On Fri, Dec 29, 20= 17 at 8:50 AM, Jordi Cervell=C3=B3 <jordi.cs92@gmail.com> wrote:

I=E2=80=99m startin= g to use OSC Watchers to keep track of things on Mobius with an external os= c device but I have some problems with this feature.

 

From the 2.0 documentation of Mobius:

loopLocation = ;- the current playback location in the loop

loopStart - fl= ashes at the loop start point

loopSubcycle - flashes at the = loop start point

loopCycle - flashes at the loop start point=

modeRecord - set when the loop is in record mode

<= p class=3DMsoNormal style=3D'mso-margin-top-alt:auto;mso-margin-bottom-alt:= auto'> 

I=E2=80=99ve tried all of them and loopStart= , loopSubcycle and loopCycle act exactly like the beaters of the Mobius Int= erface but modeRecord and loopLocation doesn=E2=80=99t work for me.

 

LoopLocation is the main reason why I=E2=80=99m using = osc watchers. I want to use Mobius without a laptop or pc monitor in front = of me. I want to use it with an iPad osc controller, and seeing the locatio= n of each loop in a continuous way  to see where I am in each loop is = crucial for my performance.

 

I=E2=80=99m using t= his line just after opening <OscConfig> but it doesn=E2=80=99t work:<= /p>

<OscWatcher name=3D'loopLocation' path=3D'/1/fader1'/>=

 

Is there any solution for this? I=E2=80=99ve tr= ied everything and searched everywhere (Mobius circular labs forum is down = now, so I can=E2=80=99t ask anything there...) but I didn=E2=80=99t found a= solution.

 

Thank you.

 

 

 

 

 

=  




--

www.ericzang.com

&= nbsp;

= --_B6CA3E1F-3704-4AE8-AA77-9142414FF2EC_-- From Loopers-Delight-request@loopers-delight.com Fri Dec 29 23:43:23 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id C85FEFF64E; Fri, 29 Dec 2017 23:43:23 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=2a00:1450:400c:c09::22d; helo=mail-wm0-x22d.google.com; envelope-from=zangeric@gmail.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=none dis=none) header.from=gmail.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=mime-version:in-reply-to:references:from:date:message-id:subject:to; bh=PlLtOPY7UcwNOoI+jvfX2NQNZd09UYmFSuy74vGFwQA=; b=KKYaLiKj4ShHobSey6HgLgPyMW0dnUDYmK8TInQPBTE0Gu0m1x7Ofa1ioE2WpqmVjE mpT6rr0Wz7u165bFiN3xrMxiN7BhYVuHHlak93wJB1Vl6ACB9rfKRzEGSvW2hvpyp57n B5x6Vu6ORk0LdK3rZLpN5jd7IKJOuVXyT0wc0TcFqHLax/KAC2KyVy5Hmp3SRLrNA9CH qyQI8LsHua974R6qnJoQimetKLMAIYIAh9BhxusZajZIBBBVKmXFY8TWH8d0b/zV4xjn OdXd2Y6np9MlQ9Xf84tRrH4rzJTiFnrz9cHofWSy2xXETSJN1cq+A78Clm4LMuNz+xTp ENaQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:mime-version:in-reply-to:references:from:date :message-id:subject:to; bh=PlLtOPY7UcwNOoI+jvfX2NQNZd09UYmFSuy74vGFwQA=; b=WF0E3pO+werG4uk+9qnAN7uHdRHkJLRnQCAPxZshoRPIj7q6CIyap+v1G1iXb87Enx R68v6mF1Cux6MOJrY2fDW8uFtx6NSs3T3DkIxD7e7gPqBYty9NcMoxZus90gFK2vrWpE MEhBHr5oqcD2WHcCPlUYJxxWBKjQoM8pyxbna1fbg8v3CSTeeOqZwu2pCbVjXWanSTSM CsztB4Xm306fxVd1Pt23QTKtv4g841aplK4HI2Np+tXAIeRbxMj/qKuuxcaoWUcHl6QX 00UMlSk7ghsn7zCvIdDWjaFUWfoeu0nVWHbmDcIkdK2qwcxuzAz54FrCFtOK1rtlYUXD 8TcQ== X-Gm-Message-State: AKGB3mKOtXt6qwOfsYFrTWhvvo31ItT1DBRZivQamGR5CyTQRAuu9wF5 u/Mr1KSXbUxSmvJbAj8h3rWFQ4wgvOR6yIRccBA= X-Google-Smtp-Source: ACJfBot0mJRDZQo1FX5YTOEIZHGpbt3I0UrPyrSYUtHkfbwq2Kpr/F3CTQYWJhfJ4DllZZw35u0dc4xQttJmt0vH8wM= X-Received: by 10.80.142.178 with SMTP id w47mr48063215edw.251.1514591001842; Fri, 29 Dec 2017 15:43:21 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <5a46bfe0.eb8ddf0a.a5e6.1d17@mx.google.com> References: <5a46644b.5b92500a.a8da8.a517@mx.google.com> <5a46bfe0.eb8ddf0a.a5e6.1d17@mx.google.com> From: Eric Zang Date: Fri, 29 Dec 2017 16:43:21 -0700 Message-ID: Subject: Re: Question about Mobius OSC Watchers To: Loopers-Delight@loopers-delight.com Content-Type: multipart/alternative; boundary="f403045c0d50a519450561833208" Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125537 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Fri, 29 Dec 2017 23:43:23 +0000 (UTC) --f403045c0d50a519450561833208 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: quoted-printable Thanks, I didn't know that feature was part of Mobius. I sure hope Mobius gets resurrected, still nothing else like it for windows as far as I know! A shame the forum is down (for quite awhile I think). Archive.org is not able to retrieve posts either. On Fri, Dec 29, 2017 at 3:21 PM, Jordi Cervell=C3=B3 wrote: > The looper program is called Mobius and OSC Watchers are a feature to be > able to send OSC messages from Mobius to export certain status of the > program. For example the loop playback position or when a loop starts aga= in > etc=E2=80=A6 > > > > You can check it out in the documentation: > > http://www.circularlabs.com/doc/v2/osc.htm#Status Export > > > > *From: *Eric Zang > *Sent: *Friday, 29 December 2017 11:11 PM > *To: *Loopers-Delight@loopers-delight.com > *Subject: *Re: Question about Mobius OSC Watchers > > > > Sorry I have no answer, but it sounds interesting, google didn't find "OS= C > Watchers". What is/where is this program? > > > > On Fri, Dec 29, 2017 at 8:50 AM, Jordi Cervell=C3=B3 > wrote: > > I=E2=80=99m starting to use OSC Watchers to keep track of things on Mobiu= s with an > external osc device but I have some problems with this feature. > > > > From the 2.0 documentation of Mobius: > > loopLocation - the current playback location in the loop > > loopStart - flashes at the loop start point > > loopSubcycle - flashes at the loop start point > > loopCycle - flashes at the loop start point > > modeRecord - set when the loop is in record mode > > > > I=E2=80=99ve tried all of them and loopStart, loopSubcycle and loopCycle = act > exactly like the beaters of the Mobius Interface but modeRecord and > loopLocation doesn=E2=80=99t work for me. > > > > LoopLocation is the main reason why I=E2=80=99m using osc watchers. I wan= t to use > Mobius without a laptop or pc monitor in front of me. I want to use it wi= th > an iPad osc controller, and seeing the location of each loop in a > continuous way to see where I am in each loop is crucial for my > performance. > > > > I=E2=80=99m using this line just after opening but it doesn= =E2=80=99t work: > > > > > > Is there any solution for this? I=E2=80=99ve tried everything and searche= d > everywhere (Mobius circular labs forum is down now, so I can=E2=80=99t as= k anything > there...) but I didn=E2=80=99t found a solution. > > > > Thank you. > > > > > > > > > > > > > > > > > -- > > www.ericzang.com > > > --=20 www.ericzang.com --f403045c0d50a519450561833208 Content-Type: text/html; charset="UTF-8" Content-Transfer-Encoding: quoted-printable
Thanks, I didn't know that feature was part of Mobius.= I sure hope Mobius gets resurrected, still nothing else like it for window= s as far as I know! A shame the forum is down (for quite awhile I think). A= rchive.org is not able to retrieve posts either.

On Fri, Dec 29, 2017 at 3:21 PM, J= ordi Cervell=C3=B3 <jordi.cs92@gmail.com> wrote:

= The looper program is called Mobius and OSC Watchers a= re a feature to be able to send OSC messages from Mobius to export certain = status of the program. For example the loop playback position or when a loo= p starts again etc=E2=80=A6

= =C2=A0

= You can check it out in the documentation:

<= p class=3D"MsoNormal">http://www.circularlabs.com/doc/v2/osc.htm#= Status Export

=C2=A0

From: Eric Zang
Se= nt: Friday, 29 December 2017 11:11 PM
To: Loopers-Delight@loope= rs-delight.com
Subject: Re: Question about Mobius OSC Wa= tchers

=C2=A0=

Sorry I have no answer, but it sound= s interesting, google didn't find "OSC Watchers". What is/whe= re is this program?

=C2=A0

On Fri, Dec 29, 2017 at 8:50 AM, Jordi Ce= rvell=C3=B3 <j= ordi.cs92@gmail.com> wrote:

I=E2=80=99m starting to use= OSC Watchers to keep track of things on Mobius with an external osc device= but I have some problems with this feature.

=C2= =A0

From the 2.0 documentation of Mobius:

loopLocation=C2=A0- the current playback location i= n the loop

loopStart=C2=A0- flashes at the loop s= tart point

loopSubcycle=C2=A0- flashes at the loo= p start point

loopCycle=C2=A0- flashes at the loo= p start point

modeRecord=C2=A0- set when the loop= is in record mode

=C2=A0=

I=E2=80=99ve tried all of them and loopStart, lo= opSubcycle and loopCycle act exactly like the beaters of the Mobius Interfa= ce but modeRecord and loopLocation doesn=E2=80=99t work for me.

=C2=A0

LoopLocation is the main r= eason why I=E2=80=99m using osc watchers. I want to use Mobius without a la= ptop or pc monitor in front of me. I want to use it with an iPad osc contro= ller, and seeing the location of each loop in a continuous way =C2=A0to see= where I am in each loop is crucial for my performance.

=C2=A0

I=E2=80=99m using this line just af= ter opening <OscConfig> but it doesn=E2=80=99t work:

<OscWatcher name=3D'loopLocation' path=3D'/1/= fader1'/>

=C2=A0

Is there any solution for this? I=E2=80=99ve tried everything and searched= everywhere (Mobius circular labs forum is down now, so I can=E2=80=99t ask= anything there...) but I didn=E2=80=99t found a solution.

=C2=A0

Thank you.

=C2=A0

=C2=A0

=C2= =A0

=C2=A0

=C2=A0=

=C2=A0




--

www.ericzang.com

=C2=A0




--
--f403045c0d50a519450561833208-- From Loopers-Delight-request@loopers-delight.com Sat Dec 30 00:15:13 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id 925B2FF656; Sat, 30 Dec 2017 00:15:13 +0000 (UTC) Old-Return-Path: X-Original-To: loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=199.224.80.229; helo=filter02.dlls.pa.frontiernet.net; envelope-from=jcshirke@frontier.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=none (p=none dis=none) header.from=frontier.com X-Originating-IP: [172.78.102.130] X-Previous-IP: 172.78.102.130 From: Jeff Shirkey Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: quoted-printable Subject: RC-50 Date: Fri, 29 Dec 2017 18:19:59 -0600 Message-Id: To: loopers-Delight@loopers-delight.com Mime-Version: 1.0 (Apple Message framework v1085) X-Mailer: Apple Mail (2.1085) Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125538 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sat, 30 Dec 2017 00:15:13 +0000 (UTC) I posted a month or so, but I thought I'd post one more time. I have a RC-50 I'm willing to sell. I don't particularly want to sell = it, but I have to come up with cash to pay the mortgage, so I'm trying = to sell some gear. I looked at Reverb prices, and $300 or so seems a = typical starting price. I'd be happy with $250. It's in great shape. I think I still have the original box, although = it's probably musty from being in a basement. I have the manual here = somewhere, too. Thanks.= From Loopers-Delight-request@loopers-delight.com Sat Dec 30 22:44:17 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id BDA35FF613; Sat, 30 Dec 2017 22:44:17 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=74.6.129.109; helo=sonic317-54.consmr.mail.bf2.yahoo.com; envelope-from=paulrichard_rocks@yahoo.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=reject dis=none) header.from=yahoo.com DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoo.com; s=s2048; t=1514673856; bh=xLc3zchl975NQTeC0oeD8QS0cYc8bh4rVi6MYAxS13U=; h=Date:From:Reply-To:To:Subject:References:From:Subject; b=SCY8feCQOlAx+2EK0JEMggQjZMZKylxHBWyvFM10WIU0RU9ikNd+cmwsPmNDj8ube/H8ZI+0Httr1g9OgzZgnIX6xQJ9gwi4KS4gm1I7iIAkHrQC3DQB+ppZ3Q95wTifE7sK+fAWrPpaOsIXhYvVPtB/6+77WAjc6UEqmXSbmbzNN0h5tE/zptgixYBH3QSsXCuwyf7QJNHod1PVrixADJjoA+29CB3YL3zfshqmT3ruk4nrP+Log7uD0QWh7fCnv7CXHozLZiyjvW7tbSj2zOqgnuuV+dc0Xx+jijnNh2mlVZEbZxl2sXOSnTM5mx48EANv7BBGNVmLqIUknDY0pA== X-YMail-OSG: OMdFE38VM1nJjiR2bBHDy9K6W_yhDmgrKtqWJ0bROtMA0DQGIYDThYLTjZGCUE6 haDdxZCNY2kkFVsQpbhvrMTkxi3rm_30A.ysYpg5tAPmdd_rnfLnlQGzow46t953HJGjuY86Cvr9 .uf31JLBynUBLfhHxn2Lfk6a9K2Qt9_WE4_pI9U.dq.VaMuZ3ksfeWTKWRVOKpA5wfO6WGzAg14g LHVIjZYdHR39mJoSIEvC991Dd9Acnm6T.KJmhJvEVnVrv.dcAAeefAd6HEKSFseMxnIwuOCbl38R u2zsrcB69iC4ckd3p5CLt9gO56WUH1VlyMmG9xl6jTcw_72A4YegmNp9nJx6BNNtIvI3C4Rj6sid JM8ejpN.sEwGz6YU4hKJ5WOYbRdvS1mZG9I5ukotCAWRzH8U8Mcrt4H1yEHkii6sk.SUrUzPwi29 M_W25fX_yGo12y.IkdZjJYCX1Yt2rE8c5WySNtJmXw7lKq2gf6i_Ng6x08muEJHbU1Lu7F2N8sNY 3nJx8NXa4rD9kvq.moAUv1jIhT3IfWdyJ4PA.3KaBT7ocyK50ZAwGpxcqPbxyr._PUt_P7w0JNU7 _jDnj6Q-- Date: Sat, 30 Dec 2017 22:40:15 +0000 (UTC) From: Paul Richards Reply-To: Paul Richards To: Message-ID: <186814377.7088989.1514673615717@mail.yahoo.com> Subject: Re: RC-50 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit References: <186814377.7088989.1514673615717.ref@mail.yahoo.com> X-Mailer: WebService/1.1.11051 YahooMailBasic Mozilla/5.0 (Linux; Android 7.0; SAMSUNG SM-N920T Build/NRD90M) AppleWebKit/537.36 (KHTML, like Gecko) SamsungBrowser/5.2 Chrome/51.0.2704.106 Mobile Safari/537.36 Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125539 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sat, 30 Dec 2017 22:44:17 +0000 (UTC) Hi: What shape could the unit be described as? Ex. MINT, etc..? What about shippi g cost? Regards, Paul -------------------------------------------- On Fri, 12/29/17, Jeff Shirkey wrote: Subject: RC-50 To: loopers-Delight@loopers-delight.com Date: Friday, December 29, 2017, 7:19 PM I posted a month or so, but I thought I'd post one more time. I have a RC-50 I'm willing to sell. I don't particularly want to sell it, but I have to come up with cash to pay the mortgage, so I'm trying to sell some gear. I looked at Reverb prices, and $300 or so seems a typical starting price. I'd be happy with $250. It's in great shape. I think I still have the original box, although it's probably musty from being in a basement. I have the manual here somewhere, too. Thanks. From Loopers-Delight-request@loopers-delight.com Sat Dec 30 22:46:04 2017 Return-Path: X-Original-To: looparc@loopers-delight.com Delivered-To: looper+looparc@arsenic.violacea.com Received: by arsenic.violacea.com (Postfix, from userid 1004) id F11E5FF660; Sat, 30 Dec 2017 22:46:04 +0000 (UTC) Old-Return-Path: X-Original-To: Loopers-Delight@loopers-delight.com Delivered-To: looper+loopers-delight@arsenic.violacea.com Received-SPF: Pass (mailfrom) identity=mailfrom; client-ip=204.29.186.8; helo=omr-m009e.mx.aol.com; envelope-from=jhsidlo@aol.com; receiver= Authentication-Results: arsenic.violacea.com; dmarc=pass (p=reject dis=none) header.from=aol.com From: James Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Mime-Version: 1.0 (1.0) Date: Sat, 30 Dec 2017 16:46:02 -0600 Subject: Finland Loopers Message-Id: <8240CD92-EAC5-4A2A-8D40-68BD3B8B19B1@aol.com> To: Loopers-Delight@loopers-delight.com X-Mailer: iPhone Mail (15B202) x-aol-global-disposition: G DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20150623; t=1514673964; bh=BdssqFfZEGnYNGyK2jl+erSGoS5ybFeNx6H60komG24=; h=From:To:Subject:Message-Id:Date:Mime-Version:Content-Type; b=XxqP3gybQI4caUuNQa0x7G9TU7M1P1es/KonTxivIVWKmVWYavQCDPwYDBne14rKI /I9QDIdYTI1zQ4P8j/yeXATEVlY4zakc37Bh58x3ERXuhHp3dP+tlM47pTEk/5G9tP gHN8zdGcLC0BNWNxk8Jp83DxZTmxXtGateh0qgNs= x-aol-sid: 3039ac1b01e25a48172b4f56 X-AOL-IP: 99.203.27.76 Resent-Message-ID: Resent-From: Loopers-Delight@loopers-delight.com Reply-To: Loopers-Delight@loopers-delight.com X-Mailing-List: archive/latest/125540 X-Loop: Loopers-Delight@loopers-delight.com Precedence: list Resent-Sender: Loopers-Delight-request@loopers-delight.com Resent-Date: Sat, 30 Dec 2017 22:46:04 +0000 (UTC) Hi, Are there any Loopers in Finland? Thanks, James Sent from my iPhone