Re: Input/Feedback LED's level question Last time I try to get helpwith this. Please help!

[andy butler <akbutler@tiscali.co.uk>]

weeksville@comcast.net wrote:
> Ignoring the fact that the feedback led is orange while recording is 
> all well and good.   The problem is it is equally as orange when 
> the recorded loop plays back (ie what the feedback led is showing while 
> recording seems to be real in that the feedback led glows yellow/orange 
> as it did while recording.)  I do believe the initial led reading of the 
> feedback led is the level the loop is receiving.
> Let me try in steps
> 1) Set input level good green
> 2) Record
> 3) Input level led green, green, green, Feedback level led yellow/orange 
> yellow/orange
> 4) Stop record. Feedback led yellow/orange yellow/orange
> 5) overdub, multiply, or insert
> 6) Input led green green green, Feedback led orange, orange, orange
> 7) Stop overdub multiply or insert. feedback led orange orange orange
>  

right,
so now try monitoring just the dry signal and check whether you get 
distortion when the input LED is still green.

andy